Arthon's Calculators - Stockpile Volumes
Stockpile Picture

Enter metre values and press CALCULATE. For conical piles (ie stacker pile), use 0 top width and 0 length with a Type B end. Weights based on water at 38F - 62.43 #/ft3.

        Stockpiles - Angles and measures
Note: Type A is difficult to achieve but may represent the end geometry better than B in some cases, depending in part on how the stockpile is created. BASE w Note: 2*w + wt=total stockpile width.
Top Width (wt) m. Stockpile End Type     A:  B:  NONE: NOTE :
Length (L) m. Specific Wgt
INPUT 2 OF 3 of the following (Angle, Base, Height):
Angle of Reposeomega deg
Base Width (w) metres
Height (h) metres
  VOLUME m3   Surface AREA m2   TONNES '000kg  
Base Stockpile   m3 m2
+ 2 end sections   m3 m2
BRITISH = TOTAL m3 m2

Arthon Industries Limited  (250) 764-6144    www.arthon.com